TECHNICAL SPECIFICATIONS
| Description | Value |
|---|---|
| Product range | Modicon X80 |
| Product or component type | Power supply module |
| Backplane compatibility | Any backplane |
| Advanced diagnostics available via the network | Availability duration, Temperature detection, Remaining service life, Redundancy information, Redundancy test |
| Primary voltage | 125 V |
| Power supply circuit type | DC |
| Secondary power |
18 W 3.3 V DC at 0…60 °C – logic I/O module 40 W 24 V DC at 0…60 °C – processor and I/O module if 3.3 V is not loaded |
| Primary voltage limit | 100…150 V |
| Input current | 600 mA at 125 V |
| Inrush current | 60 A at 125 V |
| Inrush I²t | 2.5 A².s at 125 V |
| Inrush It | 0.09 As at 125 V |
| MTBF reliability | 830,000 h |
| Protection type |
Non-accessible internal fuse – primary circuit Overload protection – 24 V sensor power supply Overvoltage protection – 24 V sensor power supply Short-circuit protection – 24 V sensor power supply |
| Secondary voltage current |
1.67 A 24 V DC – processor and I/O module 5 A 3.3 V DC – logic I/O module |
| Maximum power dissipation | 8.5 W |
| LED status |
1 LED (green) – voltage present (OK) 1 LED (green) – redundancy OK 1 LED (green) – power supply status |
| Control type | RESET push-button – cold restart |
| Electrical connection |
1 connector, 2-pin – alarm relay 1 connector, 5-pin – line power supply, protective earth |
| Insulation resistance | ≥ 100 MΩ primary / ground – ≥ 100 MΩ primary / secondary |
| Product weight | 0.61 kg |
| Micro-break immunity | 1 ms |
| Dielectric withstand |
1500 V primary / secondary – logic I/O module 1500 V primary / secondary – processor and I/O module 2300 V primary / secondary – sensor power supply 1500 V primary / ground |
| Vibration withstand | 3 gn |
| Mechanical shock withstand | 30 gn |
| Degree of protection | IP20 |
| European regulation |
2014/35/EU – Low Voltage Directive 2014/30/EU – Electromagnetic Compatibility |
| Environmental characteristic |
3C3 according to IEC 60721-3-3 3C4 according to IEC 60721-3-3 |
| Storage temperature | -40…85 °C |
| Operating temperature | 0…60 °C |
| Relative humidity | 10…95 % without condensation |
| Protective treatment | TC |
| Operating altitude |
0…2000 m 2000…4000 m with derating factor |
| Packaging – Type 1 | PCE – 1 unit – 9 × 18 × 25.5 cm – 620 g |
| Packaging – Type 2 | S03 – 6 units – 30 × 30 × 40 cm – 4.22 kg |
| Packaging – Type 3 | P06 – 48 units – 70 × 60 × 80 cm – 43.2 kg |
| Contractual warranty | 18 months |