TECHNICAL SPECIFICATIONS
| Description | Value |
|---|---|
| Product range | Modicon X80 |
| Product or component type | Power supply module |
| Backplane compatibility | Any backplane |
| Advanced diagnostics available via network | Yes |
| Redundancy information | Yes |
| Redundancy test | Yes |
| Temperature detection | Yes |
| Remaining lifetime | Yes |
| Availability duration | Yes |
| Primary voltage | 24…48 V |
| Power supply circuit type | DC |
| Secondary power |
18 W 3.3 V DC at 0…60 °C – logic I/O module 40 W 24 V DC at 0…60 °C – processor and I/O module if 3.3 V is not loaded |
| Primary voltage limit | 18…62.4 V |
| Input current | 1.9 A at 24 V – 1 A at 48 V |
| Inrush current | 60 A at 24 V – 60 A at 48 V |
| I²t at switch-on | 0.4 A².s at 24 V – 1.9 A².s at 48 V |
| It at switch-on | 0.05 As at 24 V – 0.08 As at 48 V |
| MTBF reliability | 752,000 h |
| Protection type |
Non-accessible internal fuse – primary circuit Overload protection – secondary circuit Overvoltage protection – secondary circuit Short-circuit protection – secondary circuit |
| Current at secondary voltage |
5.5 A 3.3 V DC – logic I/O module 1.67 A 24 V DC – processor and I/O module |
| Maximum power dissipation | 8.5 W |
| LED status |
1 LED (green) voltage presence (OK) 1 LED (green) redundancy OK 1 LED (green) power supply status |
| Control type | RESET push-button – cold restart |
| Electrical connection |
1 connector, 2 pins – alarm relay 1 connector, 5 pins – line power supply, protective earth |
| Maximum cable distance between devices |
10 m – 1.5 mm² copper cable 15 m – 2.5 mm² copper cable |
| Insulation resistance | ≥ 100 MΩ primary / ground – ≥ 100 MΩ primary / secondary |
| Product weight | 0.81 kg |
| Micro-break immunity | 1 ms |
| Dielectric strength | 1500 V primary / ground – 1500 V primary / secondary |
| Degree of protection | IP20 |
| European regulation |
2014/35/EU – Low Voltage Directive 2014/30/EU – Electromagnetic compatibility |
| Environmental characteristic |
3C3 compliant with IEC 60721-3-3 3C4 compliant with IEC 60721-3-3 |
| Storage temperature | -40…85 °C |
| Operating temperature | 0…60 °C |
| Relative humidity | 10…95 % non-condensing |
| Protective treatment | TC – Humiseal 1A33 conformal coating |
| Operating altitude |
0…2000 m 2000…4000 m with derating factor |
| Packaging – Type 1 | PCE – 1 unit – 9.5 × 18 × 25.5 cm – 666 g |
| Packaging – Type 2 | S03 – 6 units – 30 × 30 × 40 cm – 4.680 kg |
| Packaging – Type 3 | P06 – 48 units – 70 × 60 × 80 cm – 43.2 kg |
| Contractual warranty | 18 months |