TECHNICAL SPECIFICATIONS
| Description | Value |
|---|---|
| Product range | Modicon X80 |
| Product or component type | Power supply module |
| Backplane compatibility | Any backplane |
| Advanced diagnostics available via network | Temperature detection, Redundancy test, Availability time, Redundancy information, Remaining service life |
| Primary voltage | 100…240 V |
| Power supply circuit type | AC |
| Secondary power |
18 W 3.3 V DC at 0…60 °C – logic I/O module 40 W 24 V DC at 0…60 °C – processor and I/O module if 3.3 V is not loaded |
| Primary voltage limits | 85…264 V |
| Network frequency | 50/60 Hz |
| Network frequency limits | 47…63 Hz |
| Apparent power | 0.13 kVA |
| Input current | 0.55 A at 240 V – 1.01 A at 115 V |
| Inrush current | 30 A at 120 V – 60 A at 240 V |
| I²t at switch-on | 1 A².s at 115 V – 4 A².s at 230 V |
| It at switch-on | 0.1 As at 115 V – 0.15 As at 230 V |
| MTBF reliability | 792,000 h |
| Protection type |
Internal non-accessible fuse – primary circuit Overload protection – 24 V DC sensor supply Overvoltage protection – 24 V DC sensor supply Short-circuit protection – 24 V DC sensor supply |
| Secondary current |
5.5 A 3.3 V DC – logic I/O module 1.67 A 24 V DC – processor and I/O module |
| Maximum power dissipation | 8.5 W |
| LED status |
1 green LED – voltage present (OK) 1 green LED – redundancy OK 1 green LED – power supply status |
| Control type | RESET push-button – cold restart |
| Electrical connection |
1 x 2-pin connector – alarm relay 1 x 5-pin connector – line supply, protective earth |
| Insulation resistance | ≥ 100 MΩ primary / ground – ≥ 100 MΩ primary / secondary |
| Product weight | 0.51 kg |
| Micro-interruption immunity | 1 ms |
| Dielectric strength |
1500 V primary / secondary – logic I/O module 1500 V primary / secondary – processor and I/O module 2300 V primary / secondary – sensor supply 1500 V primary / ground 500 V 24 V – sensor output / ground |
| Vibration resistance | 3 gn |
| Mechanical shock resistance | 30 gn |
| Protection rating | IP20 |
| European Regulation |
2014/35/EU – Low Voltage Directive 2014/30/EU – Electromagnetic Compatibility Directive |
| Environmental characteristics |
3C3 in accordance with IEC 60721-3-3 3C4 in accordance with IEC 60721-3-3 |
| Storage temperature | -40…85 °C |
| Operating temperature | 0…60 °C |
| Relative humidity | 5…95 % at 55 °C without condensation |
| Protective treatment | TC, Humiseal 1A33 conformal coating |
| Operating altitude |
0…2000 m 2000…4000 m with derating factor |
| Packaging – Type 1 | PCE – 1 unit – 9.8 × 18.3 × 25.3 cm – 614 g |
| Packaging – Type 2 | S03 – 6 units – 30 × 30 × 40 cm – 4.420 kg |
| Contractual warranty | 18 months |

